 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LSM OSCILLATOR 30 kHz to 200 kHz TM Low Power Surface Mount Crystal Oscillator DESCRIPTION actual size The LSM oscillator has the highest accuracy, stability and lowest current of all STATEK surface mount oscillators. The design consists of a hermetically-sealed CX-4 STATEK crystal, and a CMOS-compatible integrated circuit. The hybrid design is hermetically-sealed with a kovar lid in a surface mount ceramic package. Permanent precision tuning of the oscillator is accomplished by laser trimming the crystal. side view PACKAGE DIMENSIONS 2 FEATURES 3 Low power consumption Low aging CMOS compatible Double hermetically sealed package Full military testing available 3.3 Volt operation available Optional Tri-State Low harmonic noise APPLICATIONS 1 4 F TYP. DIM A B C* D E F G INCHES .400 .180 .071 .200 .080 .050 .055 mm 10.16 4.57 1.80 5.08 2.03 1.27 1.40 .405 .185 .079 .205 .085 .058 .063 MAX. INCHES mm 10.29 4.70 2.00 5.21 2.16 1.47 1.60 Industrial, Computer & Communications General purpose clock oscillator Data logger Remote sensor Real Time Clock Medical test and diagnostics Military Portable field communication Military high speed modem Flight recorder .068 [1.73] .064 [1.63] Termination material is Au over Ni (SM1), solder dip (SM3) also available. *SM1 Termination; SM3 = .084 in. (2.13mm) Max. SUGGESTED LAND PATTERN .075 [1.91] GRID PLACEMENT COURTYARD .132 [3.35] INCHES[mm] .200 [5.08] 10151 - Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS: LSM 32.768 kHz**** ABSOLUTE MAXIMUM RATINGS Specifications are typical at 25oC unless otherwise noted. Specifications are subject to change without notice. Supply Voltage* Calibration Tolerance** 5V A: B: C: Frequency Stability*** 0OC to +50OC -20OC to+70OC Voltage Coefficient Aging Shock Vibration Frequency Change vs 10%Output Load Change 0.0025% 0.004% + _ 0.007% + _ 0.01% + _ + _ + _ + _ + _ + _ + _ Supply Voltage VDD Storage Temperature Process Temperature -0.3V to 7V -55OC to +125OC 260OC 20 sec. 10% (3.3V available) .001% (10ppm) .0025% .01% Typ. MAX. Typ. MAX. 25ppm 40ppm + _ 70ppm + _ 100ppm + _ + _ ELECTRICAL CHARACTERISTICS LSM 32.768 kHz All parameters are measured at ambient temperature with a 10M and 10pF load at 5V. SYMBOL PARAMETER VOH VOL tr tf SYM IDD Output Voltage Hi Output Voltage Lo Rise Time (10%-90%) Fall Time (10%-90%) Duty Cycle Supply Current VDD =5V VDD =3.3V PIN CONNECTIONS MIN. 4.8 TYP. MAX. UNIT 4.95 0.05 0.2 12 12 50 8.3 5.5 25 25 60 15 10 V V nsec. nsec. % A A 1 ppm/V Typ. + _ 3 ppm/V MAX. + _ 1 ppm/year Typ. + _ 3 ppm/year MAX. 1000g, 1msec.,1/2 sine + _ 3 ppm MAX. 10g rms, 10 - 2000 Hz + _ 3 ppm MAX. + _ 40 Pin Connection Output Enable or NC Ground Output VDD 1 ppm MAX. O 1 2 3 4 Operating Temperature -10 C to +70 C Commercial -40OC to +85OC Industrial -55OC to +125OC Military * Contact the factory for lower voltage. ** Tighter tolerances available. *** Does not include calibration tolerance. Positive variations small compared to negative variations (See data sheet 10103). **** Contact the factory for other frequencies. O PACKAGING LSM -Tray Pack (Standard) -16mm tape, 7" or 13" reels (Optional) Per EIA 481 (see data sheet 10109) TYPICAL CURRENT CONSUMPTION, LSM-32.768 kHz OUTPUT WAVE FORM CURRENT (uA) 12 10 8 6 4 2 3 4 VDD (Volts) 5 6 7 VDD VOH 90%* 10%* VOL 0 * Of VDD tr tf HOW TO ORDER LSM SURFACE MOUNT CRYSTAL OSCILLATORS LSM 3 S T SM3 32.768 kHz ( A / I ) 3=3.3V Blank=5V (Std.) "S" if special or custom design. Blank if Std. *T = Tri-State Blank = Pin 1 no connection Frequency Blank= SM1 (Std.) SM1 = Gold Plated SM3 = Solder Dipped *Tri-state not available 100 kHz to 200 kHz **Other calibration fill in ppm Frequencies other than 32.768 kHz _ A: + 0.01% _ B: + 0.03% _ C: + 0.1% **Calibration Tolerance @ 25OC (A) (B) (C) Temp. Range: C = Commercial I = Industrial M = Military S = Specify 10151 - Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com |
Price & Availability of LSM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |